Mining boots | Harvik Art No. 9906

Mining boots | Harvik Art No. 9906 Type of construction Vulcanized Rubber Upper and Sole. Compliance European Standard, CE Approved – EN 345-2: 1996 CSA – Canadian Standards Association – Z195-02 ASTM – American Society of Testing Materials – F2413-05 Air pressure applied for water leakage testing 50 kPa Lining Material Leg Lining : Woven Cotton Canvas Weight ( min.) 250g/ m ² Thickness ( min.) 0.60mm Insole Lining : Woven Sheeting Weight ( min.) 140g/ m ² Thickness ( min.) 0.30mm Rubber Components Leg : Black in colour, 70% Natural Rubber & 30% Styrene Butadiene Rubber. Front Reinforcement : Lemon yellow in colour, 70% Natural Rubber & 30% Styrene Butadiene Rubber Thickness of Upper and Fabric Combined 1.60mm ( Minimum) Sole / Heel Black in colour, 100% Nitrile Butadiene Rubber Oil Resistant - Immersion in iso-octane ( 22 hours at 22 º C) 12% max change in volume. Abrasion Resistant - DIN 53516 : 220mm ³ max. Hardness Shore A : 70 ± 5. Steel Midsole One piece Stainless Steel, meets CSA-Z195-02 Sole Penetration and EN 345 Flexing test. Steel Toe Meets EN 345 Impact and Compression. Chemical Resistant Upper – Resistant towards mild acids and alkali. Sole – Resistant towards mild acids. Finishing Hypalon Lacquer. Packing Polybag 6 pairs / carton.
sepatu boot karet